chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Steering Column > < Power Steering Pump Flow Control Valve Replacement|Page 7811
Page 2
background image

3. Ensure that the power steering pump pulley (1) is flush against the power steering pump shaft (2), with an allowable variance of 0.25 mm (0.010

inch).

4. Install the drive belt. Refer to Drive Belt Replacement in Engine.
5. Install the lower fan shroud. Refer to Fan Shroud Replacement - Lower in Cooling Systems.

Steering Column > < Power Steering Pump Flow Control Valve Replacement|Page 7811