Astro Van 2WD V6-4.3L VIN X (2002)
1. Install the assist step retainer to the rocker panel. The right side is a one piece retainer, the left side is a two piece retainer .
1. Clean the rocker panel with isopropyl cleaner or equivalent to remove all of the old double back tape.
2. Remove the strip from the double sided adhesive tape.
3. Align the assist step retainer to the rocker panel and press firmly in place.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the assist step retainer screws to the rocker panel.
Tighten the assist step retainer screws to the rocker panel to 2 N.m (18 lb in).
3. Install the assist step extensions. Refer to Assist Step Replacement (See: Assist Step Replacement) .
4. Lower the vehicle.
Assist Step Rear Anchor Replacement
Assist Step Rear Anchor Replacement
Removal Procedure
1. Raise the vehicle to a suitable height.
Important: The assist step does not have to be removed to replace the assist step support bracket.
2. Remove the nuts that attach the assist step plate to the assist step support bracket.