chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Assist Step Extension Replacement - Front|Page 8616 > < Assist Step Extension Replacement - Front|Page 8614
Page 12
background image

7. Remove the front section of the assist step extension as follows:

1. Lift in the center of the assist step extension.
2. Slide the front section forward.
3. Lift upward on the assist step extension to release it from the retainer and assist plate.

8. Remove the screws from the right rear inner and outer wheel well. Open the sliding door to expose the inner screw.

9. Remove the screws from the rear outer edge of the assist step extension. If the vehicle is equipped with assist steps, the cladding is shorter on the

left side (bottom edge).

10. Remove the rear section of the assist step extension, by lifting upward until fully released from the retainer.

Assist Step Extension Replacement - Front|Page 8616 > < Assist Step Extension Replacement - Front|Page 8614