Astro Van 2WD V6-4.3L VIN X (2002)
1. Route the cable through the front of the cowl.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the screws that retain the cable to cowl side panel.
Tighten the screws to 2 N.m (18 lb in).
3. Install the left cowl side trim panel. Refer to Trim Panel Replacement - Cowl Side (See: Interior Moulding / Trim/Trim Panel/Service and
Repair/Trim Panel Replacement - Cowl Side) .
4. Pull the cable assembly from the front of the cowl until the grommet is seated.
5. Connect the cable to the fasteners in the radiator support.