chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

License Plate Bracket > < Molding/Nameplate Replacement - Exterior Trim|Page 8843
Page 1
background image

Cowl Moulding / Trim: Service and Repair

Air Inlet Grille Panel Replacement

Removal Procedure

1. Disconnect the windshield washer hoses from the windshield wiper arm.
2. Remove the windshield wiper arms. Refer to Wiper Arm Replacement   in Wipers/Washer Systems.
3. Remove the antenna. Refer to Fixed Antenna Mast Replacement   in Entertainment.
4. Remove the air inlet grille panel to cowl screws.

5. Remove the air inlet grille panel from the vehicle.

Installation Procedure

1. Install the air inlet grille panel to the vehicle.

Notice:  Refer to Fastener Notice   in Cautions and Notices.

2. Install the air inlet grille panel to cowl screws.

Tighten the air inlet grille panel to cowl screws 2 N.m (18 lb in).

3. Install the antenna. Refer to Fixed Antenna Mast Replacement   in Entertainment.
4. Install the windshield wiper arms. Refer to Wiper Arm Replacement   in Wipers/Washer Systems.

License Plate Bracket > < Molding/Nameplate Replacement - Exterior Trim|Page 8843