Astro Van 2WD V6-4.3L VIN X (2002)
5. Remove the bolt, the retainer, and the lower insulator of the mount:
1. Loosen the remaining bolts on that side far enough for the upper insulator to be removed.
2. Gradually lower the screw jack in order to allow the frame to come away from the body.
6. Remove the upper body insulator.
Installation Procedure
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install the upper body insulator:
1. Gradually raise the screw jack in order to allow the frame to meet the body.
2. Tighten the bolts of the mounts not replaced.
Tighten the bolts of the mounts to 35 N.m (26 lb ft).
2. Install the lower insulator, the retainer, and the bolt to the mount. Do not tighten.
Important: Follow the body mount tightening sequence.
3. Snug the right #2 body mount (2).
4. Snug the left #2 body mount (2).
5. Tighten the remaining body mounts: