Astro Van 2WD V6-4.3L VIN X (2002)
Arm Rest: Service and Repair
Armrest Replacement (YC6)
Armrest Replacement (YC6)
Removal Procedure
1. Remove the armrest by rotating it to the down position.
Slip a pair of snap-ring pliers between the seat and the armrest.
2. Ensure that the snap-ring pliers go between the arms of the snap plate.
3. Keeping the armrest plate arms open, pull the armrest straight back off the seat post.
Installation Procedure
1. Install the armrest by setting it at approximately 45 degrees.
2. Press the armrest until fully engaged into the groove of the seat post (1).
