Astro Van 2WD V6-4.3L VIN X (2002)
4. Install the seat back and seat back hinges to the seat.
5. Install the bolts that retain the seat back hinge to the seat cushion frame in the locations noted during disassembly.
Tighten the bolts that retain the seat back hinge to the seat cushion frame to 30 N.m (22 lb ft).
6. Install the hog rings that retain the seat cushion cover and pad to the seat cushion frame along the side of the seat cushion in the locations noted
during disassembly.
7. Connect the hook and loop fastener at the rear corner of the seat cushion cover.
8. Install the bolt that retains the inner seat back hinge to the seat cushion frame.
Tighten the bolt that retain the inner seat back hinge to the seat cushion frame to 30 N.m (22 lb ft).
9. Install the hog rings in the locations noted during disassembly.
10. Install the carpet covering the center of the seat cushion frame along the rear edge of the seat, near the inner hinge.
11. Install the rear bench seat to the vehicle. Refer to Seat Replacement - Rear Bench (See: Service and Repair/Seat Replacement - Rear Bench) .
Seat Back Hinge Trim Replacement - Rear Left
Seat Back Hinge Trim Replacement - Rear Left
Removal Procedure
1. Remove the rear bench seat to the vehicle. Refer to Seat Replacement - Rear Bench (See: Service and Repair/Seat Replacement - Rear Bench) .
2. Remove the screw retaining the lower hinge cover.
