Astro Van 2WD V6-4.3L VIN X (2002)
Seat Cushion: Service and Repair
Seat Cushion Frame Replacement
Seat Cushion Frame Replacement
Removal Procedure
1. Remove the bucket seat from the vehicle. Refer to Seat Replacement - Bucket (See: Service and Repair/Seat Replacement - Bucket) .
2. Remove the seat cushion cover and pad. Refer to Seat Cushion Cover Replacement - Front (YC5 and YC6) (See: Seat Cushion Cover
Replacement - Front (YC5 and YC6))Seat Cushion Cover Replacement - Front (YC7) (See: Seat Cushion Cover Replacement - Front (YC7)) .
3. Remove Lumbar support cable. Refer to Lumbar Support Cable Replacement (See: Service and Repair/Lumbar Support Cable Replacement) .
4. Remove the seat back hinge bolts from the right side of the seat frame.
5. Remove the seat back hinge bolts from the left side of the seat frame.
6. Remove the seat cushion frame from the seat back frame.
Installation Procedure
1. Install the seat cushion frame to the seat back frame.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the seat back hinge bolts to the left side of the seat frame.
Tighten the seat back hinge bolts to the left side of the seat frame to 30 N.m (22 lb ft).