Astro Van 2WD V6-4.3L VIN X (2002)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Balancer Replacement
Removal Procedure
1. Remove the fan shroud assembly.
2. Remove the drive belt.
3. Remove the crankshaft balancer.
4. Clean and inspect all parts.
Installation Procedure
1. Apply a small amount of grease to the crankshaft front cover oil seal sealing surface if reusing the seal.
2. Install the crankshaft balancer.
3. Install the drive belt.
4. Install the fan shroud assembly.