Astro Van 2WD V6-4.3L VIN X (2002)
1. Install the right valve rocker arm cover and bolts.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine wiring harness bracket and nut to EVAP canister purge solenoid valve stud.
Tighten the engine wiring harness bracket nut to 8 Nm (71 inch lbs.).
3. Install the PCV hose in the valve rocker arm cover and the air cleaner outlet duct.
4. Connect the spark plug wires to the distributor cap.
5. Install the engine cover.
