Astro Van 2WD V6-4.3L VIN X (2002)
Compressor Clutch Bearing: Service and Repair
Clutch Rotor and/or Bearing Removal
TOOLS REQUIRED
^
J 6083 Snap Ring Pliers
^
J 33023-A Puller Pilot
^
J 41552 Pulley Puller
^
J 29886 Driver Handle
^
J 9398-A Bearing Remover
1. Remove the clutch plate and hub assembly.
2. Use the J 6083 in order to remove the following components:
^
The pulley rotor (1)
^
The bearing assembly retaining ring (2)
3. Install the J 33023-A to the front head.
4. Install the J 41552 down into the inner circle of slots (1) in the rotor.
