chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Compressor Hose Assembly Replacement|Page 7432 > < Compressor Hose Assembly Replacement|Page 7430
Page 1
background image

Hose/Line HVAC: Service and Repair
Compressor/Condenser Hose Replacement - Auxiliary

TOOLS REQUIRED

J 39400-A Halogen Leak Detector

REMOVAL PROCEDURE

1. Disconnect the IAT sensor.
2. Disconnect the MAF sensor.
3. Remove the air cleaner.
4. Recover the refrigerant from the system. Refer to Refrigerant Recovery and Recharging.
5. Remove the grille.
6. Remove the engine cover.
7. Raise vehicle. Refer to Lifting and Jacking the Vehicle.
8. Disconnect the auxiliary evaporator lines nut from the compressor hose assembly.
9. Lower vehicle.

10. Remove the nut that attaches the compressor hose assembly bracket to the engine.

Compressor Hose Assembly Replacement|Page 7432 > < Compressor Hose Assembly Replacement|Page 7430