chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Compressor Hose Assembly Replacement|Page 7454 > < Compressor Hose Assembly Replacement|Page 7452
Page 16
background image

9. Leak test the fitting(s) of the repaired or reinstalled component using the J 39400-A.

Evaporator Tube Replacement - Auxiliary Side

TOOLS REQUIRED

J 39400-A Halogen Leak Detector

REMOVAL PROCEDURE

1. Recover the refrigerant from the system. Refer to Refrigerant Recovery and Recharging.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
3. Remove the auxiliary evaporator side inlet tube from the auxiliary evaporator rear tube (3).
4. Remove the O-ring seal.

5. Remove the auxiliary evaporator side inlet tube from the auxiliary evaporator front tube (2).
6. Remove the O-ring seal.

Compressor Hose Assembly Replacement|Page 7454 > < Compressor Hose Assembly Replacement|Page 7452