Astro Van 2WD V6-4.3L VIN X (2002)
Tail Lamp: Description and Operation
PARK, TAIL, MARKER AND LICENSE LAMPS
The park, tail, marker and license lamps are turned on when the headlamp switch is placed in the PARK or ON position or anytime the headlights are
requested. The PK LPS fuse in the IP fuse block supplies battery positive voltage to the park lamp relay and the headlamp switch. The Body Control
Module (BCM) provides a ground, or control circuit, to the park lamp relay coil circuit during ALC operation. When the park lamps are turned on
during ALC, the BCM energizes the park lamp relay. The park lamps can also be supplied battery positive voltage directly from the headlamp switch.
Current flow is to the park, tail, marker and license lamps. The front park and marker lamps are grounded at G100 and G101. The rear park, tail, marker
and license lamps are grounded at G400 and G401. If the headlight switch is left in the ON position, the park, tail and marker lamps will remain on until
turned off or the battery runs dead.
