Astro Van 2WD V6-4.3L VIN X (2002)
IMPORTANT:
^
When installing the CKP sensor, make sure the sensor is fully seated before tightening the mounting bolt. A poorly seated CKP sensor may
perform erratically and may set false DTCs.
^
Do not reuse the original O-ring.
1. Replace the CKP sensor O-ring.
2. Lubricate the O-ring with clean engine oil before installing the CKP sensor.
IMPORTANT: Make sure the CKP sensor mounting surface is clear and free of burrs.
3. Install the CKP sensor.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the CKP sensor mounting bolt.
Tighten
Tighten the CKP sensor mounting bolt to 9 N.m (80 lb in).
