chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

With Special Tool|Page 4486 > < With Special Tool
Page 2
background image

IMPORTANT: DO NOT allow any substances other than gasoline, ethanol/gasoline blends, air, or acetone into the test ports of the fuel composition
tester. Contaminants in the J 44175 could result in misdiagnosis.

9. Pour the fuel sample from the beaker (1) into the J 44175, until the level of the fuel is at the top of each fuel test port (2).

10. Observe the diagnostic LEDs on the fuel composition tester.

If the red fuel diagnostic LED is illuminated, a fuel contamination condition exists. Refer to Fuel System Cleaning.

11. Measure the output frequency of the fuel composition tester.

Alcohol/Contaminants-in-Fuel Diagnosis (With Special Tool)

12. Subtract 50 from the reading on the DMM to obtain the percentage of alcohol in the fuel sample. Refer to the examples in the table.
13. If the fuel sample contains more than 10 percent ethanol, replace the fuel in the vehicle.

With Special Tool|Page 4486 > < With Special Tool