Astro Van 2WD V6-4.3L VIN X (2002)
1. Install the seat belt latch.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the seat belt latch nut.
Tighten
Tighten the seat belt latch nut to 53 N.m (39 lb ft).
3. Install the rear bench seat side cover and screw.
For a description of the RPO Code(s) shown in this article/image, refer to the RPO Code List found at Vehicle/Application ID See: Application and
ID/RPO Codes
Seat Belt Buckle and Latch Replacement - No.2 Rear
REMOVAL PROCEDURE
1. Remove the rear seat form the vehicle.
2. Remove the seat belt buckle and latch retaining bolt from the seat frame.
