Astro Van 2WD V6-4.3L VIN X (2002)
Seat Belt Latch: Service and Repair
Seat belt Buckle and Latch Replacement - Rear (RPO ZP5)
REMOVAL PROCEDURE
1. Remove the rear bench seat from the vehicle.
2. Remove the seat belt latch by removing the hog rings and lifting up on the cover to expose the nut. The complete seat cover does not have to be
removed.
3. Remove the seat belt latch nut.
4. Remove the seat belt latch.
INSTALLATION PROCEDURE
1. Install the seat belt latch.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the seat belt latch nut.
Tighten
Tighten the seat belt latch nut to 53 N.m (39 lb ft).
3. Install the seat cover and rehog ring it back in place.
4. Install the rear bench seat to the vehicle.
For a description of the RPO Code(s) shown in this article/image, refer to the RPO Code List found at Vehicle/Application ID See: Application and
ID/RPO Codes
