Astro Van 2WD V6-4.3L VIN X (2002)
3. Use the J29193 in order to install the relay rod to the idler arm ball stud.
Ensure that the seal is on the stud.
-
Tighten the J29193 to 54 Nm (40 ft. lbs.) in order to seat the tapers.
4. Remove the J29193.
5. Install the new prevailing torque nut (2) to the idler arm (4) ball stud.
-
Tighten the prevailing torque nut to 47 Nm (35 ft. lbs.).
6. Lower the vehicle.
7. Adjust the toe-in.