Astro Van 2WD V6-4.3L VIN X (2002)
3. Use the J29193 in order to install the connecting rod ball stud to the pitman arm. Ensure that the seal is on the stud.
-
Tighten the J 29193 to 54 Nm (40 ft. lbs.) in order to seat the tapers.
4. Remove the J 29193.
5. Install the new prevailing torque nut (2) to the connecting rod (1) ball stud at the pitman arm (3).
-
Tighten the connecting rod to pitman arm prevailing torque nut to 62 Nm (48 ft. lbs.).
6. Lower the vehicle.