Astro Van 2WD V6-4.3L VIN X (2002)
5. Use the J 6627-A in order to remove the inner tie rod from the relay rod.
6. Loosen the adjuster tube clamp bolts (3).
7. Unscrew the tie rod ends from the adjuster tube (4).
8. Remove the inner tie rod ends (5) from the adjuster tube (4).
9. Inspect the following components for damage:
-
The threads on the tie rod (1, 5)
-
The ball stud threads
-
The adjuster tube (4) for bending or damaged threads
-
The tie rod end seals for excessive wear
10. Clean the threads on the ball stud and in the ball stud nut.
11. Clean the tapered surfaces.
Installation Procedure