Astro Van AWD V6-4.3L VIN X (2003)
2. If equipped with a rear defogger, install the following components:
1. The rear window defogger electrical connector to the harness
2. The grommet, fully to the body, in order to ensure that water can not enter
3. The body-side rear garnish molding and speaker as one unit
Refer to Trim Replacement - Third Pillar Left (See: Interior Moulding / Trim/Trim Panel/Service and Repair/Trim Replacement - Third Pillar
Left) in Interior Trim.
4. The body-side rear garnish molding to the headliner
Refer to Trim Replacement - Fourth Pillar Left (See: Interior Moulding / Trim/Trim Panel/Service and Repair/Trim Replacement - Fourth
Pillar Left) in Interior Trim.
3. Inspect the rear defogger operations.
4. Remove the prop and close the liftgate.
5. Inspect the rear defogger in order to verify that the component is operating correctly.
