Astro Van AWD V6-4.3L VIN X (2003)
1. Install the retaining rail to the body.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the retaining rail screws.
Tighten the retaining rail screws to 2 N.m (18 lb in).
3. Install the rear half of the cladding to the retaining rail.
4. Install the push-in retainers that retain the cladding to the retaining rail.
5. Install the screws that retain the cladding to the rear wheelhouse.
Tighten the screws to 2 N.m (18 lb in).
6. Install the front half of the cladding to the retaining rail.
7. Install the push-in retainers that retain the front half of the cladding to the retaining rail.
8. Install the nut on the back of the cladding to the stud.
Tighten the nut to 7 N.m (62 lb in).
9. Install the retainers into the front wheelhouse extension flange.
10. Install the screws retaining the front half of the cladding to the front wheelhouse.
Tighten the screws to 2 N.m (18 lb in).
