Astro Van AWD V6-4.3L VIN X (2003)
4. Install the screws that retain the sliding door step trim plate to the vehicle.
Tighten the screws that retain the sliding door step trim plate to 2 N.m (18 lb in).
5. Install the screws that retain the rear trim plate to the vehicle.
Tighten the screws that retain the rear trim plate to 2 N.m (18 lb in).
6. Close the door(s).
Mat Replacement - Stepwell
Mat Replacement - Stepwell
Removal Procedure
1. Remove the screws from the step plate cover.
2. Remove the step panel cover.
Installation Procedure
