Astro Van AWD V6-4.3L VIN X (2003)
1. Install the garnish molding to the pillar:
1. Align the locator pin with the pillar.
2. Press the locator pin firmly into place, seating all fasteners.
2. Install the driver's seat belt upper mounting bolt. Refer toShoulder Belt Guide Adjuster Replacement - Front Seat Belts.
Notice: Refer toFastener Notice in Cautions and Notices.
3. Install the garnish molding retaining screw.
Tighten the garnish molding retaining screw to 2 N.m (18 lb in).
Garnish Molding Replacement - Lift Gate
Garnish Molding Replacement - Lift Gate
Removal Procedure
1. Remove the interior handle screw cover (12).
2. Remove the screws (11).
3. Remove the handle (10) and the escutcheon (9).
4. Remove the garnish molding screws (3).
5. Remove the garnish molding (2).
Installation Procedure
1. Install the garnish molding (2).
