Astro Van AWD V6-4.3L VIN X (2003)
INSTALLATION PROCEDURE
1. Install the panel to the vehicle:
1.1.
Align the C- pillar retaining clips with the holes in the body.
1.2.
Press the panel in order to seat the fasteners into place.
2. Install the C- pillar retaining screw.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the C- pillar retaining screw to 2 N.m (18 lb in).
Trim Replacement - Third Pillar Left
Trim Replacement - Third Pillar Left
Tools Required
J 38778 Door Pad Trim and Garnish Clip Remover
Removal Procedure
1. Remove the seat belt upper mount. Refer to Shoulder Belt Guide Adjuster Replacement - Front in Seat Belts.
2. Remove the retaining screw.
3. Use the J 38778 in order to release the fasteners that retain the panel to the vehicle.
Installation Procedure
1. Install the panel to the vehicle:
1. Align the retaining clips with the holes in the body.
