Astro Van AWD V6-4.3L VIN X (2003)
3. Install the seat back cushion cover and pad to the seat cushion frame.
4. Install the hog rings that retain the seat cushion cover to the seat cushion frame located at the rear edge of the seat frame.
5. Install the J-hooks that retain the seat cushion cover to the seat cushion frame.
6. Install the bolts that retain the seat back hinges to the seat cushion frame.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolts that retain the seat back hinges to the seat cushion frame to 30 N.m (22 lb ft).
7. Install the right and left sides of the seat back hinge trim.
8. Install the bench seat and risers in the vehicle.
Seat Cushion Cover Replacement - Front With RPO Code YC7
SEAT CUSHION COVER REPLACEMENT - FRONT WITH RPO CODE YC7
REMOVAL PROCEDURE
1. Remove the bucket seat from the seat risers.
