Astro Van AWD V6-4.3L VIN X (2003)
3. Install the backing plate bolts.
Tighten the backing plate bolts to 135 Nm (100 ft. lbs.).
4. Install the park brake shoe.
5. Install the axle shaft.
6. Adjust the park brake shoe.
7. Install the rotor.
8. Install the rear park brake cable to the park brake actuator lever.
9. Install the park brake cable to the mounting bracket until the locking tabs snap into place.
10. Install the tire and wheel assembly.
11. Remove the safety stands and lower the vehicle.
12. Adjust park brake cable.
