Astro Van AWD V6-4.3L VIN X (2003)
12. Remove the 4 bolts attaching the A/C condenser to the radiator. Reposition the condenser.
13. Remove the radiator.
Installation Procedure
1. Install the radiator.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 4 bolts attaching the A/C condenser to the radiator.
^
Tighten the bolt to 6 Nm (53 inch lbs.).
3. Install the grille.
4. Install the coolant recovery reservoir hose to the radiator filler neck.
5. Reposition the coolant recovery reservoir hose clamp to the coolant recovery reservoir.
6. Install the engine oil cooler lines to the connector fittings.
