Astro Van AWD V6-4.3L VIN X (2003)
Installation Procedure
1. Install the engine cover.
2. Install the screws to the engine cover.
Do not fully tighten the screws.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the latch screws.
Tighten the latch screws to 4 N.m (35 lb in).
4. Install the engine cover bolts to the brackets.
Tighten the engine cover bolt to 25 N.m (18 lb ft).
5. Insert the floor air outlet duct. Refer to Instrument Panel (I/P) Extension Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Instrument Panel, Gages, and Console/Instrument Panel (I/P) Extension Replacement) in Instrument Panel,
Gages and Console.
6. Insert the instrument panel extension. Refer to Air Outlet Replacement - Center Floor in Heating, Ventilation and Air Conditioning.
Engine Cover Guide Replacement
