Astro Van AWD V6-4.3L VIN X (2003)
1. Install the right valve rocker arm cover and bolts.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine wiring harness bracket and nut to EVAP canister purge solenoid valve stud.
Tighten
Tighten the engine wiring harness bracket nut to 8 Nm (71 lb in).
3. Install the PCV hose in the valve rocker arm cover bolts and the air cleaner outlet duct.
Tighten
Tighten bolts to 12 Nm (106 lb in).
4. Connect the spark plug wires to the distributor cap.
5. Install the engine cover.
