Astro Van AWD V6-4.3L VIN X (2003)
INSTALLATION PROCEDURE
1. Uncap or unplug all open connections.
2. Install the compressor hose assembly to the vehicle.
3. Install transmission filler tube to the throttle cable bracket.
4. Install the bolt to the transmission filler tube to the oil indicator tube.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolt to 12 N.m (106 lb in).
5. Install new O-rings.
6. Install the compressor hose assembly to the accumulator.
7. Tighten the compressor hose assembly nut at the accumulator.
Tighten
Tighten the nut to 48 N.m (35 lb ft).
8. Install new O-rings.
9. Install the compressor hose assembly to the condenser.
10. Tighten the compressor hose assembly nut (6).
Tighten
Tighten the nut to 28 N.m (21 lb ft).
11. Install the hose clamp bracket nut (3) to the engine stud.
Tighten
Tighten the nut to 5 N.m (44 lb in).
12. Install new sealing washers.