chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Compressor Hose Assembly Replacement|Page 1274 > < Compressor Hose Assembly Replacement|Page 1272
Page 17
background image

7. Lower the vehicle.
8. Evacuate and recharge the system. 
9. Leak test the fitting(s) of the repaired or reinstalled component using the J 39400-A.

Evaporator Tube Replacement - Auxiliary Side

EVAPORATOR TUBE REPLACEMENT - AUXILIARY SIDE

TOOLS REQUIRED

J 39400-A Halogen Leak Detector

REMOVAL PROCEDURE

1. Recover the refrigerant from the system.
2. Raise and support the vehicle. Refer to Vehicle Lifting.  

3. Remove the auxiliary evaporator side inlet tube from the auxiliary evaporator rear tube (3).
4. Remove the O-ring seal.

5. Remove the auxiliary evaporator side inlet tube from the auxiliary evaporator front tube (2).
6. Remove the O-ring seal.

Compressor Hose Assembly Replacement|Page 1274 > < Compressor Hose Assembly Replacement|Page 1272