Astro Van AWD V6-4.3L VIN X (2003)
Power Steering Line/Hose: Service and Repair
Power Brake Booster Inlet Hose Replacement
Power Brake Booster Inlet Hose Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the hydraulic brake booster inlet hose from the of the power steering pump.
3. Lower the vehicle.
4. Disconnect the hydraulic brake booster inlet hose from the hydraulic brake booster.
5. Remove the hydraulic brake booster inlet hose from vehicle.
Installation Procedure
Notice: Do not start the engine with any power steering hose disconnected, or damage to the components could occur.