Astro Van AWD V6-4.3L VIN X (2003)
1. Install EBCM (2) on to the BPMV (5).
Notice:
Refer to Fastener Notice in Service Precautions.
See: Brakes and Traction Control/Service Precautions/Vehicle Damage Warnings/Fastener Notice
See: Brakes and Traction Control/Service Precautions/Vehicle Damage Warnings/Fastener Notice
2. Install the new screws (1) in the EBCM (2).
Tighten the screws to 5 Nm (39 inch lbs.) in an X-pattern.
3. Connect the electrical connectors to the EBCM.
4. Secure the module (1) to the frame bracket (3) and fuel pipe shield (2) with the two nuts (4).
5. Revise the tire calibration using the Scan Tool Tire Size Calibration function.
6. Return to Diagnostic System Check - ABS.
See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnostic System Check.
