Astro Van AWD V6-4.3L VIN X (2003)
Tighten the WSS mounting bolt to 18 Nm (13 ft. lbs.).
3. Install the WSS cable mounting clip to the knuckle.
4. Install the WSS cable mounting clip to the upper control arm.
5. Install the WSS cable mounting clip to the frame attachment point.
6. Connect the WSS cable electrical connector.
7. Install the brake rotor (2).
8. Install the tire and wheel.
9. Return to Diagnostic Starting Point - Antilock Brake System. See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Starting Point - Antilock Brake System
