Astro Van AWD V6-4.3L VIN X (2003)
6. Install the outer tie rod ball stud to the steering knuckle.
7. Install the outer tie rod ball stud retaining nut.
-
Tighten the outer tie rod ball retaining nut to 49 Nm (36 ft. lbs.).
8. Install a new cotter pin to the outer tie rod stud nut. Bend the pin ends against the nut flats.
9. Install the hub and bearing assembly.
10. Load the torsion bar.
11. Install the tire and wheel.
12. Lower the vehicle.
13. Check the front wheel alignment.
