Astro Van AWD V6-4.3L VIN X (2003)
4. Install the servo cover and O-ring seal.
5. Install the J 29714-A.
6. Tighten the bolt on the J 29714-A in order to compress the servo cover.
7. Install the servo cover retaining ring.
8. Remove the J 29714-A from the oil pan flange.
Notice: Refer to Fastener Notice in Service Precautions.
9. Install the oil pan bolt.
Tighten the oil pan bolt to 11 Nm (97 inch lbs.).
10. Install the transmission heat shield.
11. Remove the drain pan.
12. Lower the vehicle.
13. Fill the transmission to the proper level with DEXRON III transmission fluid.