Astro Van AWD V6-4.3L VIN X (2003)
3. Adjust the A/T shift lock control actuator with the shift lever clevis in the neutral position:
3.1.
Pull out the tab (1) on the adjuster block side (2) of the AT shift lock control actuator.
3.2.
Press on the adjuster block (2) to disengage the adjuster teeth. Slide the adjuster block (2) as far away from the actuator as possible.
3.3.
Lock the adjuster block in place by pushing inward on the tab (1).
4. Inspect the A/T shift lock control actuator for the following items:
4.1.
The AT shift lock control actuator must lock the shift lever clevis when the shift lever clevis is put into the PARK position.
4.2.
Turn the ignition to the ON position and depress the brake pedal in order to move the gear shift lever out of the PARK position. The
actuator will be energized.
4.3.
Readjust the AT shift lock control actuator if needed.
5. Install the lower steering column trim cover.
6. Enable the SIR system.
