Astro Van AWD V6-4.3L VIN X (2003)
12. Remove the grommet from the hole in the floor panel.
13. If the vehicle is equipped with a transfer case, remove the bolt and washer securing the clip and the range selector cable to the transfer case.
14. Remove the range selector cable from the vehicle.
Installation Procedure
1. Feed the steering column end of the range selector cable through the grommet hole in the floor panel.
2. Lower the vehicle.
3. Connect the range selector cable end to the steering column shift controller stud ball.
4. Install the range selector cable to the steering column bracket.
5. Install the clip that secures the range selector cable to the steering column bracket.
