Astro Van AWD V6-4.3L VIN X (2003)
24. Install the top half of J 36652 onto the lower half of J 36652, over the CV joint (1) and the CV joint seal.
25. Align the swage ring and the swage ring clamp.
26. Insert the bolts into J 36652. Hand tighten the bolts until the bolts are snug.
Tighten each bolt 180 degrees at a time. Tighten each bolt alternately until both sides of the top half of J 36652 touch the bottom half of J 36652.
27. Loosen the bolts and remove the halfshaft assembly from J 36652.