Astro Van AWD V6-4.3L VIN X (2003)
1. Install the control module in the mounting bracket.
NOTICE: Use the correct fastener in the correct location. Replacement fasteners must be the correct park number for that application. Fasteners
requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints,
lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping
force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts
and systems.
2. Install the mounting screws for the control module.
3. Tighten the mounting screws to 6 Nm (53 lb.in).
4. Install the electrical connectors in the control module.
