chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Cruise Control Switch > < Cruise Control Module|Locations|Page 9840
Page 1
background image

Cruise Control Servo Cable: Adjustments

Fig. 19  Unlocking cable conduit

1. Unlock the cable conduit engine fitting, Fig. 19.
2. Move cable conduit until throttle plate begins to open.
3. From this position, move conduit in the opposite direction enough to close the throttle plate.
4. Do not release cable, until the cable conduit lock is in place.

Fig. 18  Locking cable conduit

5. While holding the cable conduit, firmly push down on the cable conduit until it snaps in place, Fig. 18.

Cruise Control Switch > < Cruise Control Module|Locations|Page 9840