chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Service Port HVAC > < A/C High Pressure Switch
Page 1
background image

Refrigerant Pressure Sensor / Switch: Service and Repair
A/C Low Pressure Switch

The low-pressure switch is located on the low-side refrigerant line running along the engine compartment rear bulkhead, just above the evaporator case.
It is mounted on a Schrader valve, therefore, the system does not have to be discharged to remove the switch.

Remove or Disconnect

1. Negative battery cable.
2. Switch electrical connector.
3. Switch by unscrewing from the refrigerant line.

Install or Connect

1. Low-pressure switch to refrigerant line.
2. Electrical connector to switch.
3. Negative battery cable.

Service Port HVAC > < A/C High Pressure Switch