chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Relay Module > < OnStar(R) - Analog Only Systems Information|Page 9
Page 1
background image

Keyless Entry Module: Service and Repair

Control Module

Remove or Disconnect

1. Instrument panel cluster trim plate.
2. Radio or I/P storage pocket.
3. Electrical connectors.
4. Two bolts retaining the control module to the carrier.
5. Module from vehicle.

Install or Connect

1. Control module to vehicle.
2. Two bolts retaining the control module to the carrier.
3. Electrical connectors.
4. Radio or I/P storage pocket.
5. Instrument panel cluster trim plate.

^

Check system operation.

Relay Module > < OnStar(R) - Analog Only Systems Information|Page 9