chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Front Doors|Page 6504 > < Front Doors|Page 6502
Page 1
background image

Power Door Lock Actuator: Service and Repair
Side Doors

Remove or Disconnect

1. Negative (-) battery cable.
2. Door trim panel.
3. Wiring harness from the motor.
4. Motor to door rivets. Using a 5 mm (3/16 inch) drill bit, drill the head from the rivet.
5. Motor from the door.

Install or Connect

1. Motor to the door. The lock lever must fit into the arm of the motor.
2. Fasteners. Use a 6 mm (1/4 inch) diameter bolt 13 mm (1/2 inch) long with a spring washer and nut to reattach the motor to the door.
3. Wiring harness to the motor.
4. Door trim panel.
5. Negative (-) battery cable.

Front Doors|Page 6504 > < Front Doors|Page 6502