Astro Van M V6-262 4.3L VIN W CPI (1992)
Power Door Lock Actuator: Service and Repair
Liftgate
Liftgate Lock Actuator
Remove or Disconnect
1. Negative (-) battery cable.
2. Liftgate interior molding.
3. Control rods right side and left side from the actuator lever rod.
4. Actuator to liftgate rivets. Drill out the head of the rivet using a 5 mm (3/16 inch) drill bit.
5. Actuator from the liftgate.
Install or Connect
1. Actuator to the littgate.
2. Actuator to littgate fasteners. Use a 6 mm (1/4 inch) diameter bolt 13 mm (1/2 inch) long with a spring washei; and nut, to re-attach the actuator to
the door.
3. Actuator lever rod to control rods right side and left side.
4. Liftgate interior molding.
5. Negative (-) battery cable.
Remote Lock Lever
Remove or Disconnect
1. Door trim panel.
2. Control rods from the lever.
3. Lever to door rivet. Grind the head from the rivet.
4. Lever from the door.
