Astro Van M V6-262 4.3L VIN W CPI (1992)
7.
Apply weatherstrip adhesive (P/N 12345097 or equivalent) to the flange area, 12-18 inches from the centerline of the top of the vehicle (Figure 2)
and install the weatherstrip.
Apply weatherstrip adhesive to the contours of the flange and verify that the weatherstrip is fully seated in the contour (Figure 2).
8.
Verify that the weatherstrip "Golf Club" and "Batwing Joint" are positioned correctly by closing one lower door and checking for a good
compression fit (no gaps), repeat for other side (see Figures 2, 3 and 4).
9.
Install the lower carpet sill plate.
