Astro Van M V6-262 4.3L VIN W CPI (1992)
3.
Find the center width measurement that is approximately 6 in. (15 cm) from the seam of the belt which attaches the seat or retractor assembly
(Figure 2 & 3).
4.
Position the latch plate ABOVE the location of the stop button (Figure 1).
5.
Insert the pin half of the button into the seat belt webbing at the location measured in step 2 and align the other button half to the pin portion.
6.
Press the two halves together with your fingers or a pair of pliers.
SERVICE PARTS INFORMATION:
Parts are expected to be available on 4/26/93.
